HP rp5800 Base Model Retail System manual Stand Mode, Trigger Object Sense, 6 Always On

Figure 2-5Flashing Mode

Always On

No trigger pull is required to read a barcode. Scanning is continually on. If the trigger is pulled, the reader acts as if it is in Trigger Single Mode. Double Read Timeout prevents undesired multiple reads while in this mode.

NOTE: Double Read Timeout is programmed using the PG.

Figure 2-6 Always On

Stand Mode

No trigger pull is required to read a barcode. Scanning is turned on automatically when an item is placed in reader’s field of view. If the trigger is pulled, the reader acts as if it in Trigger Single mode. Double Read Timeout prevents undesired multiple reads while in this mode.

NOTE: Double Read Timeout is programmed using the PG.

Figure 2-7 Stand Mode

Trigger Object Sense

This mode is similar to Stand Mode, except that a trigger pull is required to activate the decoder.

Figure 2-8Trigger Object Sense

ENWW Scanning Modes 5