HP rp5800 Retail System Programming Barcodes, Resetting the Product Configuration to Defaults

Programming Barcodes

For your convenience, this guide includes the programming barcodes required to configure the scanner for use with different interface (terminal/host) types.

Refer to the Programming Guide (PG) at http://www.hp.com/support for more complete information about programming and configurable features.

Resetting the Product Configuration to Defaults

If you aren't sure what programming options are in your scanner, or you've changed some options and want to restore the Custom Default Configuration that may have been saved in the scanner, scan the Restore Custom Default Configuration barcode below. This will restore the custom configuration for the currently active interface.

Figure 2-9Restore Custom Default Configuration

USB Interface

The scanner attaches directly to a USB host, or a powered USB hub, and is powered by it. No additional power supply is required. When using a USB interface, the scanner auto-detects the USB and defaults to the HID keyboard interface.

Figure 2-10Select USB-COM-STD

Figure 2-11Select USB Keyboard (with standard key encoding)

Figure 2-12Select USB Alternate Keyboard (with alternate key encoding)

6 Chapter 2 Using the Scanner ENWW