Electrical Specifications, Grounding | HP RP7405/7410 specification

System Specifications

Electrical Specifications

This section provides electrical specifications for hp rp7405/rp7410 servers.

Grounding

The site building shall provide a safety ground/protective earth for each AC service entrance to all cabinets.

Install a PE (protective earthing) conductor that is identical in size, insulation material, and thickness to the branch-circuit supply conductors. The PE conductor must be green with yellow stripes. The earthing conductor described is to be connected from the unit to the building installation earth or, if supplied by a separately derived system, at the supply transformer or motor-generator set grounding point.

Circuit Breaker

The Marked Electrical for the hp rp7405/rp7410 server is 12 amps. The recommended circuit breaker size is 20 amps for North America. For countries outside North America, consult your local electrical authority having jurisdiction for the recommended circuit breaker size.

System AC Power Specifications

Power Cords

The supplied power cord length is 15 feet (457.4 cm). Table B-3lists the various power cables available for use with a hp rp7405/rp7410 system. Each power cord is 15 feet (4.5 meters) in length with a IEC 60320-1 C19 female connector attached to one end.

Table B-3	Power Cords

Part Number	Description	Where Used

8120-6895	Stripped end, 240 volt	International-Europe

8120-6897	Male IEC309, 240 volt	International

8121-0070	Male GB-1002, 240 volts	China

8120-6899	Male CEEE 7/7, 240 volt	Continental Europe

8121-0558	Male ISI-32, 240 volts	Israel

8120-6903	Male NEMA L6-20, 240 volt	North America/Japan

Appendix B

RP7405/7410 specifications

The HP RP7405 and RP7410 are high-performance servers in the HP Integrity line, specifically designed for mission-critical applications. These servers are built on the Itanium architecture and showcase HP's commitment to reliability, scalability, and performance. Targeted primarily at the enterprise market, both models are ideal for data-intensive workloads, virtualization, and large databases.

One of the standout features of the RP7405 and RP7410 is their robust architecture. The servers utilize HP's NonStop technology, ensuring high availability and fault tolerance. This architecture is designed to provide continuous uptime, which is crucial for businesses dependent on uninterrupted access to their data and applications. The RP7405 supports up to 4 processors, while the RP7410 can accommodate up to 8 processors, allowing for enhanced compute power and the ability to handle increasingly demanding workloads.

In terms of memory, the RP7405 and RP7410 support significant RAM configurations, making them capable of handling large memory-intensive applications. They are equipped with advanced memory management technology, including ECC (Error-Correcting Code) memory, which helps to detect and correct data corruption, thereby enhancing system reliability.

The servers employ HP's Virtual Partition (vPars) technology, which allows for efficient server consolidation by enabling multiple virtual servers to operate on a single physical machine. This capability enhances resource utilization and simplifies management, thus reducing IT costs while maximizing performance.

HP's Serviceguard clustering software is integrated into both servers, offering enhanced availability through active-active clustering and failover capabilities. This software ensures that workloads can be seamlessly transitioned between servers in the event of hardware failures or maintenance, further minimizing downtime.

Security is also a paramount consideration with the HP RP7405 and RP7410. The servers come equipped with advanced security features, including secure boot, encryption, and an array of compliance certifications, ensuring that sensitive data is protected against unauthorized access.

Additionally, the servers support a wide range of operating systems, including HP-UX, which is optimized for the Itanium architecture. This flexibility allows organizations to choose the operating environment that best suits their application needs.

In conclusion, the HP RP7405 and RP7410 are powerful servers designed for high-performance applications in enterprise environments. With their advanced architecture, extensive memory support, virtualization capabilities, and robust security features, these servers stand out as reliable solutions for organizations seeking to enhance their IT infrastructure while ensuring high availability and performance.

HP RP7405/7410 manual Electrical Specifications, Grounding, Circuit Breaker, Table B-3 Power Cords

Models: RP7405/7410