4.4 OSD operational instructions
Icon | Main menu option | Submenu option |
Switch the video input (only applicable to some models)
Brightness
Contrast
Image control
Horizontal position
Vertical position
Clock
Clock phase
Note
When the monitor is connected to two active and valid video sources, switching between the video input sources is available. Switching the video input signal sources may take you several seconds.
To adjust the brightness level of the screen.
To adjust the contrast level of the screen.
To adjust the image on the screen. The ambient brightness sensor can also be enabled or disabled (only applicable to some models)
To automatically adjust the image on the screen (only applicable to VGA input).
To adjust the horizontal position of an image (only applicable to VGA input).
To adjust the vertical position of an image (only applicable to VGA input).
To minimize the visible vertical lines or bars on the screen background. Adjusting the clock will change the horizontal image on the screen (only applicable to VGA input).
To adjust the clock phase of the screen. This adjustment eliminates all horizontal noises to enable clearer and more lifelike images and characters (only applicable to VGA input)
8