HP SAS Host Bus Adapters manual OpenVMS Installation, Preparing the Server

2 OpenVMS Installation

This chapter provides information on installing the AH303A Host Bus Adapter on systems running OpenVMS V8.3-1H1. This chapter includes the following topics:

“Preparing the Server” (page 19)

“Installing the Adapter Hardware” (page 19) “Completing the Adapter Installation” (page 20) “Connecting the Adapter to Other Devices” (page 20) “Updating System Firmware” (page 21)

Preparing the Server

The instructions in this section are for the first-time installation of the AH303A. If you are replacing an AH303A or installing an additional card, you can perform these operations online. See “Installing the Adapter Hardware Online” (page 14).

To prepare the server for installation of the AH303A, follow these steps:

1.Install the VMS831H1I_FIBRE_SCSI-V0100 and VMS831H1I_IPB-V0100 patch kits (or subsequent patches).

You can download patches from the HP IT Resource Center at: http://itrc.hp.com

Search for the patch names. Installation instructions are included in the download packages. For more information, see the Release Notes that are included with the patch kits.

2.Perform a normal system shutdown.

3.Power off the server.

4.Power off all peripheral devices attached to the server.

5.Unplug the AC power cord from the outlet, and then unplug it from the server.

6.Disconnect all peripheral devices attached to the server.

Installing the Adapter Hardware

CAUTION: Electronic component can easily be damaged by small amounts of static electricity. To avoid damage, follow the guidelines in Appendix A (page 23).

To install the adapter, follow these steps:

1.Depending on the server model, remove or open the server access panel. (For detailed instructions, see the documentation that was provided with the server.)

WARNING! To reduce the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with the server before attempting the installation. Many servers are capable of producing energy levels that are considered hazardous and are intended to be serviced only by qualified personnel who have been trained to deal with these hazards. Do not remove enclosures or attempt to bypass any interlocks that may be provided for the purpose of removing these hazardous conditions.

WARNING! To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them.

2.Locate the PCIe bus expansion slots, and select the slot that you want to use. (For more information, see the server documentation.)

3.Depending on the server model, remove the retaining screw or open the expansion slot latch that secures the PCIe slot.

Preparing the Server 19