
QuickSpecs
HP ProLiant ML310 Generation 2
Technical Specifications
| 80 GB 7.2K | Capacity | 80,000 MB |
|
Hard Drives | Height | 1.028 in/2.611cm |
| |
|
| Width | 4.0 in/10.16 cm |
|
|
| Interface | Serial ATA |
|
|
| Transfer Rate | 1.5 Gb/s |
|
|
| Synchronous |
|
|
|
| (Maximum) |
|
|
|
| Seek Time | Single Track | 0.9 ms |
|
| (typical reads, including | Average | 9.0 ms |
|
| settling) | 17.0 ms | |
|
|
| ||
|
|
| Rotational | 7,200 rpm |
|
| Physical Configuration Bytes/Sector | 512 | |
|
|
| Logical Blocks | 156,301,488 |
|
| Operating Temperature41° to 131° F (5° to 55° C) | ||
|
|
|
| |
48X Max IDE (ATAPI) | Disk | Applicable Disk | ||
|
|
| Form 1 and 2) |
|
|
|
| Photo CD (Single and | |
|
|
| Mixed Mode (Audio and Data combined) | |
|
|
|
| |
|
| Capacity | 540 MB (Mode 1, 12 cm) | |
|
|
| 650 MB (Mode 2, 12 cm) | |
| Block Size | Mode 1 | 2,048 bytes |
|
|
| Mode 2 | 2,340 bytes, 2,336 bytes | |
|
| 2,352 bytes |
| |
|
| 2,328 bytes |
| |
| Interface | IDE (ATAPI) |
|
|
| Access Times (typical) | Random | <100 ms |
|
|
| <150 ms |
| |
| Data Transfer Rate | Sustained | 3000 to 7200 KB/s (20X to 48X) | |
|
| Burst | 150 KBps to 7,200 KBps | |
|
| Bus Rate | 16.7 MBps |
|
| Cache Buffer | 128 KB |
|
|
|
| < 7seconds |
|
|
| Stop Time | < 4seconds |
|
|
| Laser Parameters | Type | Semiconductor Laser GaA1As | |
|
| Wave Length | 780 ± 25 nm |
|
| Operating Conditions | Temperature | 41° to 113° F (5° to 45° C) | |
|
| Humidity | 10% to 80% |
|
| Dimensions | (HxWxD, maximum) | 1.7 x 5.85 x 8.11 in (4.29 x 14.86 x 20.60 cm) | |
|
| Weight | 2.09 lb (0.95 kg) |
|
|
|
|
|
|
DA - 12168 Worldwide QuickSpecs — Version 28 — | Page 32 |