HP SCSI Embedded NC7761 PCI Network Interface, 10/100/1000T Gigabit Compatibility, Connector

QuickSpecs

HP ProLiant ML310 Generation 2

Technical Specifications

Embedded NC7761 PCI	Network Interface	10Base-T/100Base-TX/1000Base-TX
10/100/1000T Gigabit	Compatibility	IEEE 802.3 10Base-T
network adapter		IEEE 802.3ab 1000Base-T
		IEEE 802.3u 100Base-TX
	Data Transfer Method	32-bit bus-master PCI
	Network Transfer Rate	10Base-T(Half-Duplex)	10 Mb/s
		10Base-T(Full-Duplex)	20 Mb/s
		100Base-TX(Half-	100 Mb/s
		Duplex)
		100Base-TX(Full-	200 Mb/s
		Duplex)
		1000Base-TX (Half and	2000Mb/s
		Full-Duplex)
	Connector	RJ-45
	Cable Support	10Base-T	Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
		10/100/1000Base-TX	Category 5 UTP; up to 328 ft (100 m)

Integrated 4 Channel SATA Controller (SATA NHP Models only)

Drives Supported	Up to 4 SATA hard drives (1 drive/channel)
Channels	4
Storage Capacity	1 TB
Maximum SATA	150 MB/s per channel
Channel Transfer Rate
SATA Protocols	SATA-1a
Internal SATA	One 4-lane connector (all four channels)
Connectors

Single Channel Ultra320 SCSI Adapter (SCSI Models only)

Drives Supported	Up to 15 SCSI devices Wide
Data Transfer Method	64-bit/100-MHz PCI bus-master
SCSI Channel Transfer	320 MB/s per channel
Rate
Maximum Transfer	1033 MB/s per channel
Rate per PCI Bus (peak)
SCSI Protocols	Ultra320, Wide Ultra3, Wide Ultra2, Wide Ultra SCSI-3, Fast-Wide
	SCSI-2, and Fast SCSI-2
	Fast SCSI-2
Electrical Protocol	Low Voltage Differential (LVD)
SCSI Termination	Active Termination
External SCSI	None.
Connectors	NOTE: To implement an external SCSI connection, install an optional
	controller or internal to external SCSI option kit (part number 159547-
	B22 for HD68 or 333370-B21 for VHDCI).
Internal SCSI	One 68-Pin Wide Ultra SCSI-3 connectors
Connectors

DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006 Page 33