HP SCSI Microsoft Windows Server 2003 Standard & Web Edition, Microsoft Small Business Server

QuickSpecs

HP ProLiant ML310 Generation 2

Standard Features

OS Support	Microsoft Windows Server 2003 (Standard & Web Edition)
	Microsoft Small Business Server 2003
	Microsoft Windows 2000 Server
	Novell NetWare
	Linux (Red Hat, SuSE, and UnitedLinux)
	VMware Virtualization Software
	NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our
	OS Support Matrix at: http://www.hp.com/go/supportos
	NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant ML310, please
	see: http://h18023.www1.hp.com/support/files/server/us/index.html.
	NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux
	Web site at: http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html
	NOTE: For more complete and up-to-date information on how to buy server operating systems
	from HP please visit the OS product site at:
	http://h18004.www1.hp.com/products/servers/software/OEM.html
	NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the
	VMware Server Support Matrix at:
	http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html
Rack Airflow	Rack 10000 series Cabinets
Requirements	The increasing power of new high-performance processor technology requires increased cooling
	efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
	maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
	CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
	adequate airflow and to prevent damage to the equipment:
	Front and rear doors: If your 42U server rack includes closing front and rear doors,
	you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to
	bottom to permit adequate airflow (equivalent to the required 64 percent open area for
	ventilation).
	Side: The clearance between the installed rack component and the side panels of the
	rack must be a minimum of 2.75 inches (7 cm).
	CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
	This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
	cooling that can lead to thermal damage.
	NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation
	CD provided with the server, or to the server documentation located in the Support section at the
	following URL: http://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html.
Factory Express	HP Factory Express offers configuration, customization, integration and deployment services for
Portfolio for Servers	HP servers and storage products. Customers can choose how their factory solutions are built,
and Storage	tested, integrated, shipped and deployed.
	Factory Express offers service packages for simple configuration, racking, installation, complex
	configuration and design services as well as individual factory services, such as image loading,
	asset tagging, and custom packaging. HP products supported through Factory Express include a
	wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
	BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape
	libraries and configurable network switches.
	For more information on Factory Express services for your specific server model please contact
	your sales representative or go to http://www.hp.com/go/factory-express.

DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006 Page 6