HP Server Blade BL495c G6 Front bezel

To replace the component:

1.Install the mezzanine card. Press down above the back side of the connector to seat the card.

2.Install the access panel ("Access panel" on page 24).

3.Install the server blade.

Front bezel

To remove the component:

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.

1.Power down the server blade (on page 23).

2.Remove the server blade (on page 23).

3.Remove the front bezel.

Removal and replacement procedures 28