![](/images/new-backgrounds/1315955/31595571x1.webp)
CAUTION: To avoid damage to the system board, processor socket, and screws, do not overtighten the heatsink screws. Use the wrench supplied with the system to reduce the possibility of overtightening the screws.
7.Install the heatsink. Insert both screws, and then alternate tightening until the heatsink is seated properly.
8.Install the access panel ("Access panel" on page 24).
9.Install the server blade.
Battery tray
This component is available for use with future options.
To remove the component:
1.Power down the server blade (on page 23).