To connect the
1Use the audio connection table to connect your audio system to the sound card.
2Turn on the computer.
3Plug in and turn on the speaker system power.
After connecting the speaker system to the sound card, follow the steps in “Configuring the FlexiJack connector” in the Getting Started guide to configure the speaker settings in the Creative Sound Blaster
Connecting the FlexiJack connector
The FlexiJack connector performs three functions:
Digital Input/Output
Line In
Microphone
You must select the function in the Creative Console Launcher.
NOTE: If you are using the FlexiJack as your Digital In connection and you want to connect digital speakers as your output device, you will need a special connector from Creative.
