Section 2

Getting Started

Loading the Battery

Before using the camera, you must insert the supplied Lithium-ion rechargeable battery.

1.Slide the latch and open the battery cover.

2.Insert the battery observing to the correct polarity ( + and -) as shown to the right.

3. Close the battery cover.

Note

•Different battery types and ambient operating temperatures will affect the battery performance.

•Never expose the battery to extreme heat. Do not dispose of a battery by burning or by throwing it into a fire. Heat

can cause the battery to explode and/or release caustic liquid, which both may possibly cause serious injuries.

•Turn the power off and stop using the battery if you detect that the battery is excessively hot.

Charge the battery

Charge the battery fully before first use, using the AC charger or the provided USB cable. The LED on the back of the camera will blink as an indication of active charging. The LED will turn to a solid light, indicating that charging is complete. A full charge requires 4- 5 hours. The LED indicator light will turn off completely after 3 to 5 minutes. Actual charging time will vary depending upon battery condition and ambient temperature.

Note

•Never charge the battery in a way other than instructed. Otherwise, a fire or battery explosion may occur resulting in damage or serious injury.

•Use the AC adapter provided only with the proper power

supply voltage as indicated on the adapter.

• Using any other power supply voltage might cause damage

 

to the camera or possibly electric shock.

Adapter charging mode

•When you need to disconnect power from the camera, be sure to unplug the power adapter from the electrical outlet.

• If a wireless connection is active, the camera will keep running until the power runs out.

PC USB charging mode

7

EN