Inserting and Removing an SD Memory Card (Optional)

The t450 comes with limited internal memory which allows you to store some photos and videos. You can expand the memory capacity by using an optional SD memory card. Depending on the manner in which your local retailer bundled the camera package a memory card may have been included in the package. If not Secure Digital (SD) memory cards are commonly available at computer stores, large retailers, and drug stores

1.Insert an SD memory card into the slot until it clicks and locks in place. Refer to the figure below.

2.To remove an SD card from the camera, press the card inwards to release it.

3.When the card pops out, gently remove it from its slot.

4.Recommended memory capacity: 4 GB or more.

Note

•When a memory card is been inserted all new videos/photos will be stored on the card as opposed to the built-in memory.

•SD cards may be “locked” to protect data on the card from being erased. When an SD card is locked it is “read-only” while it is locked. No photos or videos can

be recorded when an SD card is locked. Make sure the lock is on the writeable unlocked position before recording any media.

8

EN