Interpreting Hardware Paths
3.HP Fibre Channel Mass Storage installation is verified if the ioscan output lists all mass storage devices attached to the adapter. If any attached devices are not listed or appear as UNCLAIMED, see the Troubleshooting and Maintenance chapter of the HP Fibre Channel Adapters Support Guide.
Interpreting Hardware Paths
The following illustration is the Fibre Channel hardware path format:
Figure 1-2 Example of a Hardware Path for a Public Loop Device
Adapter Domain Area Port Bus Target LUN
0/1/2/0.1.19.255.15.4.0
Figure 1-3 Example of a Hardware Path for a Direct Fabric Attach Device
Adapter Domain Area Port Bus Target LUN
0/1/2/0.1.19.255.0.0.0
Figure 1-4 Example of a Hardware Path for a Private Loop Device
Adapter Domain Area Port Bus Target LUN
0/1/2/0.8.0.255.0.1.0
Each field in the hardware path is described below:
|
| Fibre Channel Topology of HBA | ||
Field | Value Information | Fabric Topologies such as Public |
| Private Loop |
| ||||
|
|
| ||
|
| Loop and Direct Fabric Attach |
| |
|
|
|
| |
|
|
|
|
|
Adapter | This is the hardware path of the Fibre Channel adapter through which the LUN is seen. | |||
| In the case of | |||
|
|
|
|
|
Chapter 1 | 13 |