ZCOM C I/F Library Routines
ZCONFIG (3X)
data.setctl.cfg_class
Caller supplied type of reconfiguration. There is one predefined configuration class, ZcCLASS_X25. This event should be generated whenever an X.25 link is dynamically configured. This includes modifying the number and/or type of Virtual Circuits and creating or deleting an X.25 level 2 (LAPB) ZLU.
If the ZCOM Subsystem is used with X25/9000 and x25init is executed, this event will be generated if the configuration for an X.25 link is modified. This field is used for action 3 only.
| data.setctl.cfg_info1 |
|
| Caller supplied information that should be specific to the type of | |
| reconfiguration which took place. In the case of ZcCLASS_X25, this field | |
| must contain the X.25 Level 2 ZLU of the link’s configuration that was | |
| modified. Note that even if the ZLUs for a link were deleted from the | |
| configuration, the old Level 2 ZLU must still be supplied. A positive ZLU | |
| number indicates the link has been added, while a negative ZLU value | |
| indicates the link was deleted. This field is used for action 3 only. | |
| Response Data |
|
| No specific response data or error. |
|
System | There are 5 system configuration actions. They are for altering | |
Configuration | parameters related to the whole ZCOM runtime subsystem. Action 1 is | |
| for changing the ZCOM runtime system name. The system name is for | |
| information purposes only. This function does not affect the operation of | |
| the ZCOM subsystem. |
|
| Action | |
| Such default limits only affect newly created queues. To modify limits on | |
| existing queues, use the zsetql(3X) routine instead. | |
| Configuration Data |
|
| header.config |
|
| ZCOM_ZCONFIG_SYS (system configuration) |
|
| header.action |
|
| ZcDSC_MOD_SYS_NAME | (1) - Modify ZCOM runtime |
|
| system name. |
Chapter 4 | 197 |