ZCOM C I/F Library Routines

ZCONFIG (3X)

Action ZcDSC_DISABLE_SUBC disables a subchannel putting it into an inoperative state. All linked terminal ZLUs are marked disabled without actually sending a disable request to the interface card. This is to avoid a “hung” terminal disable request due to a hardware failure on a subchannel. This action is designed to isolate a subchannel that has failed from the ZCOM system. The ZCOM system will stop using the subchannel and the terminals on the failed subchannel may then be moved or deleted.

Action ZcDSC_SET_TIMESLOTS is used to modify timeslot assignments. Individual timeslots can be configured, without affecting the operation of the remaining timeslots on the same port.

Action ZcDSC_SET_SUBC_SPECS is used to modify subchannel specifications. Individual subchannels can be configured, without affecting the operation of the remaining subchannels on the same port.

212

Chapter 4