ZCOM C I/F Library Routines
ZCONFIG (3X)
Configuration Data
header.config
ZCOM_ZCONFIG_PORTSC (port and subchannel configuration)
header.action
ZcDSC_ALL_PARMS | (1) | - Set all operating modes | |
| (Configuration, Baud Rate and Port) | ||
ZcDSC_CFG_MODE | (2) | - Set Configuration mode only | |
| (Ecode, Sync, Mode, Parity) | ||
ZcDSC_BAUD_RATE | (3) | - Set Baud Rate mode only (S.Clk) | |
ZcDSC_PORT_MODE | (4) | - Set Port mode only (Pmode) | |
ZcDSC_BREAK_REQ | (5) | - Port Break request | |
ZcDSC_SET_XMIT_LIMIT | (6) | - Modify port transmit limit | |
ZcDSC_ENABLE_PORT | (7) | - Enable a port | |
ZcDSC_DISABLE_PORT | (8) | - Disable a port | |
ZcDSC_ENABLE_SUBC | (9) | - Enable a subchannel | |
ZcDSC_DISABLE_SUBC | (10) | - Disable a subchannel | |
ZcDSC_SET_TIMESLOTS | (11) | - Set timeslot assignment | |
ZcDSC_SET_SUBC_SPECS | (12) | - Set subchannel specification | |
header.tag1,
header.tag2
Any values.
data.setportsc.iftno
Interface card number (0, 1,...).
data.setportsc.portno
Port number in E1/T1 interface card (0...3).
data.setportsc.subchno
Subchannel number within the port (0...31).
Chapter 4 | 213 |