HP VCX Software Networks and Computers

Chapter 4. Network Conﬁguration

Routed network

Enter the DNS name or IP address of the routed network under DNS name or network address.

The IP address of the routed network is shown under Network address.

In the Netmask ﬁeld, enter the netmask of the network.

Router

The name or IP address of the router that will be used for routing to the network. If there are several routers between the Telecommuting Module and the network, ﬁll in the router closest to the Telecommuting Module.

Delete Row

If you select this box, the row is deleted when you click on Add new rows, Save, or Look up all IP addresses again.

Create

Enter the number of new rows you want to add to the table, and then click on Create.

Save

Saves all Interface conﬁguration to the preliminary conﬁguration.

Cancel

Clears and resets all ﬁelds in new rows and resets changes in old rows.

Look up all IP addresses again

Looks up the IP addresses for all DNS names on this page in the DNS servers you entered on the Basic Conﬁguration page.

Networks and Computers

Here, you name groups of computers and networks. Sometimes it can be useful to give a group of computers a network name, such as Administration. If you want to group some computers, this can be done here, even if they do not have consecutive IP addresses. You can also include a subgroup when deﬁning a new network group.

The names are used when you conﬁgure Surroundings and SNMP.

Every group of computers which can reach each other without having to pass through the ﬁrewall needs a separate network group.

The rows are sorted in alphabetical order, except that all upper case letters are sorted before lower case letters (B comes before a).