Back to Contents Page

Controls: HP w19 LCD Monitor

Operating Instructions • External Controls • OSD Lock Function • How to Adjust a Setting • Adjusting the Picture • LED Indicators

Operating Instructions

Press the power button (E) to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure). By changing these settings, the picture can be adjusted to your personal preferences.

•The power cord should be connected.

•Connect the video cable from the monitor to the video card.

•Press the power button (E) to turn on the monitor. The power indicator will light up.

External Controls

AAuto Config / Exit

BBrightness

CContrast

DMenu / Enter

EPower Button

OSD Lock Function

To lock the OSD, press and hold the Menu button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD — press and hold the Menu button while the monitor is off and then press power button to turn the monitor on.

How to Adjust a Setting

1Press the Menu button to activate the OSD window.

2Press or to navigate through the functions. Once the desired function is highlighted, press the Menu button to activate it. If the function selected has a sub-menu, press or again to navigate through the sub-menu functions. Once the desired function is highlighted, press Menu button to activate it.

3Press or to change the settings of the selected function.

4To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-3.