Connecting to a Preexisting Network
Add an AirStation without changing your existing LAN configuration
1.Set the AirStation into Bridge/AP Mode by moving the switch on the bottom from
AUTO to BRI.
2.Connect one of the AirStation’s LAN ports to an existing router or switch on your network. Connect a PC to another LAN port for configuration. Nothing should be plugged into the WAN port.
3.Open LAN Settings - LAN Port Settings and configure the following settings:
IP Address =[192.168.11.1] (Specify an unused network address from the existing
LAN.)
Subnet Mask=[255.255.255.0] (Use the same Subnet Mask as the existing LAN.) DHCP Server Function=[Disable]
4.The PC used for configuration will need to be restarted before continuing configuration.
58
