setting up and using your workstation
before writing to your CD-RW drive (if installed)
before writing to your CD-RW drive (if installed)
The CD-RW software for the drive that is installed in your HP Workstation is not included in the pre-loaded software. You must install the applications manually from the Applications CD-ROM (provided with the Workstation or as an accessory kit) before you can use the write/re-write functionality of the drive. The installation of these two software applications must be performed in the following manner:
1.Put the Applications CD-ROM into the CD drive.
2.Choose the appropriate language when the installation window appears. Next, follow the instructions to install this application.
3.Restart your system once all applications have been installed.
4.Start using the full functionality of the CD-RW drive when the system has been restarted.
If you do not install these two software packages, you can only use the CD-RW drive’s read functionality.
