QuickSpecs

HP SFP+ Transceivers (SR, LRM, LR and ER)

Technical Specifications

HP X132 10G SFP+ LC SR Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only

Transceiver (J9150A)

Connectivity

Connector type

LC

 

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10- Gigabit connectivity up to 300 m on multimode fiber.

 

Wavelength

850 nm

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19

 

 

cm)

 

Weight

0.04 lb. (0.02 kg)

 

Transceiver form factor

SFP+

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

 

Operating relative

0% to 85%, noncondensing

 

humidity

 

 

Nonoperating/Storage

-40°F to 185°F (-40°C to 85°C)

 

temperature

 

 

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption

0.6 W

 

typical

 

 

Power consumption

0.8 W

 

maximum

 

Cabling

Cable type:

 

 

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal

 

content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2

 

Type A1b or A1a, respectively;

 

Maximum distance:

 

 

2-26m with 62.5 µm multimode cable @ 160 MHz*km

 

2-33m with 62.5 µm multimode cable @ 200 MHz*km

 

2-66m with 50 µm multimode cable @ 400 MHz*km

 

2-82m with 50 µm multimode cable @ 500 MHz*km

 

2-300m with 50 µm multimode cable @ 2000 MHz*km

 

Cable length

2-300m

 

Fiber type

Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface

 

termination/polish. Angled Physical Contact (APC) is not recommended.

Services

Refer to the HP website at: www.hp.com/networking/services for details on

 

the service-level descriptions and product numbers. For details about services

 

and response times in your area, please contact your local HP sales office.

 

 

 

DA - 13285 Worldwide — Version 3 — September 5, 2012

Page 2