QuickSpecs

HP SFP+ Transceivers (SR, LRM, LR and ER)

Technical Specifications

HP X132 10G SFP+ LC LR Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only

Transceiver (J9151A)

Connectivity

Connector type

LC

 

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LR standard, providing 10- Gigabit connectivity up to 10 km on single-mode fiber.

 

Wavelength

1310 nm

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19

 

 

cm)

 

Weight

0.04 lb. (.02 kg)

 

Transceiver form factor

SFP+

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

 

Operating relative

0% to 85%, noncondensing

 

humidity

 

 

Nonoperating/Storage

-40°F to 185°F (-40°C to 85°C)

 

temperature

 

 

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption

0.9 W

 

typical

 

 

Power consumption

1 W

 

maximum

 

Cabling

Cable type:

 

 

Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and

 

ISO/IEC 793-2 Type B1;

 

 

Maximum distance:

 

 

2m-10km with 9/125 µm single-mode cable

 

Cable length

2m to 10km

 

Fiber type

Single Mode

Notes

Conditioning patch cord cables are not supported.

 

For fiber patch cords, use Ultra Physical Contact (UPC) surface

 

termination/polish. Angled Physical Contact (APC) is not recommended.

Services

Refer to the HP website at: www.hp.com/networking/services for details on

 

the service-level descriptions and product numbers. For details about services

 

and response times in your area, please contact your local HP sales office.

 

 

 

DA - 13285 Worldwide — Version 3 — September 5, 2012

Page 3