QuickSpecs
HP SFP+ Transceivers (SR, LRM, LR and ER)
Technical Specifications
HP X132 10G SFP+ LC ER Ports | 1 LC | ||
Transceiver (J9153A) | Connectivity | Connector type | LC |
|
The SFP+ ER Transceiver will transmit 10Gbps over up to 40km using standard OM3 fiber cable. This product expands the HP Networking transceiver portfolio for connections from 0m to 40km. Use only genuine HP transceivers with your HP Networking equipment to ensure reliability and support.
| Wavelength | 1550 nm |
Physical characteristics | Dimensions | 2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x 1.19 |
|
| cm) |
| Weight | .04 lb., Fully loaded |
| Transceiver form factor | SFP+ |
Environment | Operating temperature | 32°F to 158°F (0°C to 70°C) |
| Operating relative | 5% to 95%, noncondensing |
| humidity |
|
| Nonoperating/Storage | |
| temperature |
|
| Nonoperating/Storage | 5% to 95%, noncondensing |
| relative humidity |
|
| Altitude | up to 10,000 ft. (3 km) |
Electrical characteristics | Power consumption | 1.3 W |
| typical |
|
| Power consumption | 1.5 W |
| maximum |
|
Cabling | Cable type: |
|
| ||
| Maximum distance: |
|
| 40km |
|
| Fiber type | Single Mode |
Notes | Check switch release notes for minimum version of software required to | |
| support this transceiver. |
|
| Some switches have limits as to how many of this particular transceiver can | |
| be installed. See the release notes of the switch software/firmware being | |
| used for more details. |
|
Services | Refer to the HP website at: www.hp.com/networking/services for details on | |
| the | |
| and response times in your area, please contact your local HP sales office. | |
|
|
|
To learn more, visit: www.hp.com/networking
© Copyright 2012
DA - 13285 Worldwide — Version 3 — September 5, 2012 | Page 5 |