HP manual Hp vectra xe310 series 2 pc system board jumpers, Jumper Function Default J27, J29

hp vectra xe310 series 2 pc system board jumpers

	Jumper		Function	Default
	J27	CLEAR	Clears CMOS (to reload the Setup program defaults)	NORMAL
		NORMAL	Normal operation
	J29	CLEAR	Clears User and Administrator passwords	NORMAL
1		NORMAL	Normal operation
	BIOS history

For the latest BIOS, the flasher utility program, and the BIOS history refer to the HP’s Web site.

http://www.hp.com/go/vectrasupport/

beep codes for hp vectra xe310 series 2

Beep Pattern	Beep Code	Numeric	Description
		Code
— - - - - - - -	1-2-2-3	16h	BIOS ROM check-sum failure
— - - - — —	1-3-1-1	20h	DRAM refresh test failure
— - - - — - - -	1-3-1-3	22h	8042 Keyboard controller test failure
— - - - - - - —	1-3-3-1	2Ch	Autosize DRAM failure (RAM
			module missing or not installed
			correctly)
— - - - - - - - —	1-3-4-1	2Ch	RAM failure on address line xxxx1
— - - - - - - - - - -	1-3-4-3	2Eh	RAM failure on data bits xxxx1 of
			low byte of memory bus
— - - - - — —	1-4-1-1	30h	RAM failure on data bits xxxx1 of
			high byte of memory bus
- - — - - - - -	2-1-2-3	46h	ROM copyright notice check failure
- - - - - - - —	2-2-3-1	58h	Unexpected interrupts test failure
— - -	1-2	98h	Video configuration failure or option
			ROMs check-sum failure
-	1	B4h	This does not indicate an error.
			There is one short beep before
			system startup.

1.If the BIOS detects error 2C or 2E (base 512K RAM error), it displays an additional word- bitmap (xxxx) indicating the address line or bits that failed. For example, “2C 0002” means address line 1 (bit one set) has failed. “2E 1020” means data bits 12 and 5 (bits 12 and 5 set) have failed in the lower 16 bits.

1-8 hp vectra xe310 series 2 pc microtower vectras