Adaptec SCSI RAID 2120S/2200S Software User’s Guide

Controlling ARCPD for NetWare

To stop the ARCPD using NetWare, type unload arcpd.nlm then unload notify.nlm.

To restart the ARCPD, type load arcpd.nlm then load notify.nlm.

Configuring the Notifier Service

To configure the notifier service:

1Place your cursor at a command prompt in the directory where Adaptec Storage Manager was installed.

2Type any of the following commands:

■For Windows: notify -c> Enter

■For Unix/Linux: anotifyd -c> Enter

■For Netware: load notify -c > Enter

System Event Log

The next step in configuring the notifier utility will ask you whether or not controller events should be added to the system event log. The default is set to log no events.

To add controller events:

1Choose Y (yes).

2Select which level(s) of events you want to log. The list of events are found in Table 3-3. Each level of event can be enabled or disabled independently. For example, press 1 to enable logging of Critical events. Alternatively, to log both Critical and Warning, press 1 then 2.

3-32