Software Setup

NOTE: If your workstation does not support Hyper-Threading

Technology, the Hyper-Threading menu item will not be available on the Computer Setup menu.

NOTE: To enable hyper–threading, Linux systems require the latest system BIOS and an SMP kernel (for systems installed with a single processor). For additional information concerning the setup of Linux–preinstalled or Linux–enabled workstations, refer to the

HP User Manual for Linux, located at

www.hp.com/support/linux_user_manual.

For more information about the Hyper-Threading Technology, you can visit the Intel® website at www.intel.com.

Turning off the Workstation

To properly turn off the workstation, first shut down the operating system software.

CAUTION: Manually forcing the workstation off can cause loss of data.

To manually turn off power to the workstation, press and hold the power button for four seconds. However, manually turning off the power bypasses the standby state and can result in loss of data.

To reconfigure the power button to work in On/Off mode, run Computer Setup (F10). Refer to the Service and Technical Reference Guide web

link located on the Documentation Library CD

(www.hp.com/support/workstation_manuals) for more information

about using the Computer Setup (F10) utility.

Getting Started Guide

www.hp.com

2–9