Adaptec SCSI RAID 2120S/2200S Software User’s Guide

container promote {container}

Creates a multilevel volume from a RAID 0 or a single entry volume.

Parameters

{container}—ID of the array to promote into a multilevel array.

container readonly {container}

Sets the protection on the array to read-only access.

Parameters

{container}—ID of the array to set to read-only access.

container readwrite {container}

Sets the protection on an array to read-write access.

Parameters

{container}—ID of the array to set to read-write access.

container reconfigure [/stripe_size{=integer}] [/mirror{=boolean}] [/partition_move{=boolean}] [/partition_size{=integer}] [/raid5{=boolean}] [/raid10{=boolean}] [/restart{=boolean}]

[/stripe{=boolean}] [/volume{=boolean}] [/wait{=boolean}] {container} [{scsi_device}...]

Changes the configuration of an array.

Parameters

{container}—ID number of the array to reconfigure. {scsi_device}...—One or more SCSI devices.

Switches

/stripe_size—Stripe size of the array. /mirror—Reconfigure the array into a RAID 1.

/partition_move—Specifies that the array will move partitions instead of add extra space.

/partition_size—Size of a partition. /raid5—Reconfigure the array into a RAID 5.

4-24