HP xw8600 manual Standard Features Specs

QuickSpecs

HP xw8600 Workstation

Standard Features - Specs

Form Factor	Minitower
Color	Carbonite/Alloy metallic
PCI Slots	1 half-length PCI slot
(see system board section	6 full-length slots with a mechanical card guide support for a PCI card with extender bracket.
for more details)	2 PCI Express Gen2 x16 slots
	2 PCI Express x4 slots – with x8 connectors
	1 PCI Express x8/x1 switchable. When in x8 mode, 8 PCIe lanes are routed from the 2nd
	SECOND PCIe Gen2 x16 slot leaving that slot a PCI Express x8.
	Our x8 connectors are open ended, allowing a PCIe x16 card to be seated in the slot.
	1 PCI-X 133MHz slot
Bays (see storage section	Total Bays = 8
for more details)
Internal Bays	5 internal 3.5" bays (4 with acoustic dampening rail assemblies)
External Bays	3 external 5.25" bays* *Third external 5.25" bay is not full-depth, bottom bay is limited to 200mm device
	depth.
Front I/O	2 USB 2.0, 1 headphone out, Microphone, and 1 IEEE 1394a
Rear I/O	1 IEEE-1394a,
	1 IEEE-1394b,
	5 USB 2.0,
	1 standard serial port,
	PS/2 keyboard and mouse,
	2 RJ-45 to integrated Gigabit LAN, 1 audio line in, 1 audio line out, 1 microphone in; audio ports can
	be retasked to function as line in, line out, microphone, or headphone.
Integrated USB	1 USB 2.0 header (internal)
Chassis Dimensions	17.9 x 8.3 x 20.7 inches; 45.4 x 21.0 x 52.5 cm
(H x W x D)
System Weight	Exact weights depend upon configuration
	Minimum config – 40 lb (19.5 kg)
	Standard config – 46 lb (21 kg)
	Maximum config – 62 lb (28 kg)
Temperature	Operating	40° to 95° F (5° to 35° C)
	Non-operating	-40° to 140° F (-40° to 60° C)
Humidity	Operating	8% to 85%
	Non-operating	8% to 90%
Maximum Altitude	Operating	10,000 feet; 3,000 m
(non-pressurized)	Non-operating	30,000 feet; 9,100 m
Power Supply	Choice of:
	800W 80+ Efficient wide-ranging, active Power Factor Correction
	1050W 80+ Efficient wide-ranging, active Power Factor Correction
Interfaces Supported	6-channel SATA 3.0 Gb/s Interface (6 Serial-ATA connectors on the motherboard, , 2 channels
	are eSATA configurable for use with eSATA AMO Kit)
	8-channel SAS interface (8 SAS connectors on the motherboard), 2 SAS connectors are capable of
	External SATA operation
	1 EIDE interface (1 EIDE connector), IEEE 1394, USB 2.0
Hard Drive Controller	SATA and SAS controllers
Supported

DA - 12849 North America — Version 9 — May 19, 2008 Page 9