HP xw8600 Femp Standby Power, Compliant @115V, Bios Features Description PCI 3.0 Support, Via F12

QuickSpecs

HP xw8600 Workstation

Technical Specifications

FEMP Standby Power	Yes	No
Compliant @115V
(<2W in S5 – Power Off,
with Wake on LAN
disabled)
Power Consumption in ES	<20W	<25W
Mode – Suspend to RAM
(S3)
(Instantly Available PC)
BIOS Features	Description
PCI 3.0 Support	Full BIOS support for PCI Express through industry standard interfaces.
ASF 2.0 Compliant	Allows workstation status to be monitored on a remote console.
WMI Support	WMI is Microsoft's implementation of Web-Based Enterprise Management (WBEM) for Windows. WMI is
	fully compliant with the Distributed Management Task Force (DMTF) Common Information Model (CIM)
	and WBEM specifications.
BIOS Boot Spec 1.01+	Provides more control over how and from what devices the workstation will boot.
Instantly Available PC	Allows for very low power consumption with quick resume time
ROM Based F10 Setup	Review and customize BIOS settings
and Power-on Self Test
Remote System Installation	Allows a new or existing system to boot over the network and download software, including the operating
via F12	system
(PXE) (remote boot from
server)
System/Emergency ROM	Recovers corrupted system BIOS
Flash Recovery with Video
ROM Revision Levels	Identifies system BIOS revision level and reports in ROM-based F10 setup. Version is stored in an
	industry standard memory location (SMBIOS) so that management SW applications can use and report
	this information
System Board Revision	Allows management SW to read the revision level of the system board
Level	Revision level is digitally encoded into the hardware and cannot be modified
Auto Setup when new	System automatically detects addition of new hardware
hardware installed
Serial, Parallel, USB,	Enable or disables serial, parallel, USB, audio, SAS and network ports
Audio, Network,
Enable/Disable Port
Control
Removable Media Write/	Prevents ability to boot from removable media on supported devices (and can disable writes to media)
Boot Control
Power-on Password	Prevents an unauthorized person from booting up the workstation
Setup Password	Prevents an unauthorized person from changing the workstation configuration
Replicated Setup	Saves BIOS settings to diskette or USB disk-on-key in human readable file. Repset.exe utility can then
	replicate these settings on machines being deployed without entering ROM-based F10 setup
Memory Change Alert	Alerts management console if memory is removed or changed
(requires HP Client
Manager Software)
Thermal Alert	Monitors the temperature state within the chassis. Three modes:
(requires HP Client	NORMAL - normal temperature ranges
Manager Software)

DA - 12849 North America — Version 9 — May 19, 2008 Page 25