Screws,
M2.5x6mm (4)
Screw, M2×4mm 
Screws,
M2×4mm (2)
Inverter PCA 
802.11b antenna
Screws,
M2×4mm (2)
Bluetooth antenna
Figure
Reassembly Notes
•Make sure the alignment hole in the inverter PCA fits over the corresponding post in the display case.
•Make sure the alignment hole in the wireless antenna fits over the corresponding post in the display case.
•Set the bezel in place on the display, then work your way around the bezel, firmly snapping the bezel latches shut.
•The rounded screw co
•vers go on the screws at the top of the display bezel, and the flat covers go on the screws at the bottom of the bezel.
Technology Code IC) | Removal and Replacement |