5.Remove both retaining screws from the motherboard.

6.Remove the four standoffs located near the CPU module.

7.Disconnect the audio PCA and remove it from the motherboard.

8.Lift the front edge of the motherboard slightly, then carefully lift the motherboard forward and out of the bottom case.

Screws,

M2×4mm (2)

Standoffs, 5mm (4)

Screws, M2.5x6mm (3)

Screw,

M2.5x6mm

Screws, M2×4mm (2)

Screws,

M2.5x6mm (2)

Figure 2-23. Removing the Motherboard

Reassembly Procedure

•When reinstalling the motherboard, see “Reinstalling the Motherboard” on page 2-34.

•When reinstalling the bottom case, see “Replacing the Bottom Case” on page 2-35.

Technology Code IC)

Removal and Replacement 2-33