b.If you are installing a media card reader, connect the USB cable to the system board. If the media card reader has a 1394 port, connect the 1394 cable to the PCI card.
Figure 2-26 Connecting the Media Card Reader USB Cable
Figure 2-27 Connecting the Media Card Reader 1394 Cable
10.If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector.
NOTE: If you are installing a new optical drive, connect the SATA cable to the next available SATA system board connector in the following order: SATA1, SATA2, then SATA3.
Refer to System Board Drive Connections on page 24 for an illustration of the system board drive connectors.
11.Replace the front bezel and computer access panel.
30 Chapter 2 Hardware Upgrades | ENWW |
