7.Replace the four screws in the bottom of the carrier to hold the drive securely in place. Figure 2-38Replacing the Security Screws

8.Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2).

Figure 2-39Replacing the Thermal Sensor

ENWW

Installing and Removing Drives 39

Page 44 Page 46
Page 45
Image 45
HP XZ930UT, VS832UT, 6000 manual 39Replacing the Thermal Sensor
Page 44 Page 46
Top Page Image Contents