HTC 968 999732 Parts Identification, Unpacking Instructions, Tools Required, Container Contents

UNPACKING INSTRUCTIONS

•Remove all parts and packing materials from carton.

•Check carton contents against list. Be sure all parts are there.

TOOLS REQUIRED

•Two ½" Wrench

•9/16" Wrench

•9/16" Socket wrench

PARTS IDENTIFICATION

COVER ASSEMBLY

BAG CONTAINERS

CONTAINER CONTENTS

3	- Soft bag containers	2	- Weight brackets
1	- Upper chute	4	- Bolts 3/8-16 x 3¾
1	- Lower chute	8	- Nuts 3/8-16, Nyloc
1	- Catcher mount	8	- Bolts 5/16-18 x 1
1	- Cover Assembly	4	- Bolts 3/8-16 x 3½
2	- Weight plates

DUMP BAG

INDICATOR

UPPER CHUTE

CHUTE LATCH

LOWER CHUTE

LOWER CHUTE

ATTACHING STRAPS

NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated on the mower in the operator’s position.

CAUTION

BEFORE ASSEMBLING GRASS CATCHER TO MOWER:

•Place motion control levers in “NEUTRAL” position.

•Set parking brake.

•Turn ignition key “OFF” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug and place wire where it cannot come in contact with plug.

7