ASSEMBLY
1BAGGER SUPPORT ASSEMBLY
1.Remove the four carriage bolts indicated from the rear guard.
4.Install kit mount straps between the mount tube and frame as shown in the illustration. The front side of the kit mount straps should be on the inside of the mower frame.
NOTE: Models with vertically mounted muffler will not use the right mount strap.
3. Tighten all hardware.
| Hex Bolts | Flat Washers |
|
| |
Remove |
| Nut |
|
|
2. Install the bagger mount tube from the mount kit.
3.Remove the front carriage bolts securing the top mount straps to the frame.
Kit Mount
Strap
Kit Mount Strap
Nut
Mount Tube
Hex Bolt
8
