ASSEMBLY
2MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY
NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to mower.
1.Position cover assembly on ground behind mower as shown.
2.Lift and rotate cover to align cover brackets with support assembly tubes.
3.Slide cover assembly down onto the support tubes.
Cover Assembly
Support
Assembly
3CONTAINER MOUNTING
1.Install containers on supports, overlapping at center supports.
2.Close cover and lock latch handles over center support tubes.
Cover Latch
Handles
Container
Warning
Center
Support
Tubes
Container
Warning
WARNING!
DO NOT operate mower unless container is properly installed. Container is subject to wear and deterioration, check containers frequently, replace when cracked or damaged. Use only a recommended replacement container.
9
