HTC AM171 manual Using Task Manager, To customize plus code dialing, To open Task Manager

Managing Your Device  139

To customize plus code dialing

You can customize how phone numbers that begin with a plus “+” sign will be dialed.

1.Tap Start > Settings > Personal tab > Phone > Services tab.

2.Select Plus Code Dialing, then tap Get Settings. The following screen then appears:

3.To place local and international calls from the United States, select Enable.

When you place calls, the “+” sign at the beginning of phone numbers that you dial will be replaced as follows:

•When you enter a long distance phone number that starts with “+1”, the “+” will be removed and the rest of the number will be dialed. For example, if you entered +1 416 123 4567, the number to be dialed will be 14161234567.

•When you enter an international phone number that starts with a “+” followed by a digit other than 1, the “+” will be replaced with the United States international dialing code, which is already set by default. For example, if you entered +58 212 123 4567, the number to be dialed will be 011582121234567.

4.To place calls to the United States from another country, select Disable and change the International dialing code to the one used by the country where you are in.

So when you dial a phone number that starts with “+” followed by any digit (0 - 9), the “+” will be replaced with the international dialing code of the country where you are in.

Tip If you modified the international dialing code, you can tap Reset to change it back to the default.

13.4 Using Task Manager

Task Manager lets you view and stop running programs, configure the button, and enable the Quick Menu on the Home screen.

To open Task Manager

•Tap the Quick Menu button on the top right corner of the Home screen to open the Quick Menu, then tap .

•On the Home screen, slide to the Settings tab and then tap All Settings. On the System tab, tap Task Manager.

To switch back to a running program

•Tap the program name in the Quick Menu.

•On the Task Manager screen, tap and hold the program name on the Running tab, then tap Activate.

To configure the Exit ( ) button

You can configure the Exit button to shut down running programs when the button is tapped, or to just temporarily close the program screen but keep the program running.

1.On the Task Manager screen, tap the Button tab.

2.Select the Enable the “X” button to end running programs check box.

Note	When the Enable the “X” button to end running programs check box is not selected, tapping the
	Exit button will only close a program screen. The program is not ended and continues to run in the
	background.

3.Choose the action for shutting down programs (by tapping the button, or by tapping and holding

the button).

4.Tap OK.