HTC Corporation
.
Doc. Title | Raphael Service Manual |
|
| REV. | |
|
|
| |
Issued Date | 2008/7/2 | A10 | |
|
| ||
Revised Date | 2008/12/01 | ||
| |||
|
|
| |
Page | 30 of 98 | ||
|
|
| |
1.ASSEMBLE THE NAVI KEY AND
TIGHTEN 2 SCREWS AT THE LOCATION
INDICATED (P/N:
TORQUE: 0.5 ±0.1 KGF-CM
2.TIGHTEN 4 SCREWS AT THE LOCATION
INDICATED (P/N:
TORQUE: 0.7 ±0.1 KGF-CM
1.ASSEMBLE THE NAVI KEY CAP AS SHOWN. PRESS THE KEY CAP FIRMLY.
2.REMOVE ALL OF THE MYLAR AFTER ASSEMBLY PROCESS IS DONE.
NOTE: DO NOT TOUCH THE DOUBLE SIDED TAPE & FPC AREA WHILE ASSEBLE THE NAVI KEYCAP AND MAKE SURE THE SURFACE OF THE NAVI KEY FPC IS CLEAN.
NOTE:
3.PLEASE PASTE MYLAR NO. 2 & 3 AT THE LOCATION INDICATED IF THERE IS NO MYLAR ON THE BEZEL
4.CLEAN THE NAVIKEY FPC SURFACE WITH LABORATORY ALCOHOL (95% AND UP) WHILE DOING KEYCAP REWORK.
HTC CONFIDENTIAL
