HTC Corporation
.
Doc. Title | Blackstone Service Manual |
Doc. No.
Issued Date
Revised Date
Page
2008/8/21
A01
2008/11/6
75 of 96
6.3 Main unit inspection
Cosmetic inspection generic spec.:
1.Exposure of substratum is not acceptable for peeling. (Area 4 is included)If not exposure of substratum, please check by SPEC of dot or scratch. (Area 4 is not included)
2.Logo may not have blurred or double print., the peeling on logo is not acceptable.
3.The character printing of main unit does not allow bad printing, scratch, dirty,
lacquered peeling, dark/white dot on it)
4 .Camera Lens: Contamination dot / foreign matter
D≦0.25mm, S≧3mm；Lint: L≦1.5mm , W≦0.2mm。
5.Accessories include Cradle; please follow Class B for inspection.
6.Main unit cosmetic inspection criteria of class D, please follow dummy class C for inspection criteria.
GAP & STEP INSPECTIONS
Description | Accept criteria | Level | |
Status of main unit assembly | Defective assembly and deformed shape were not | Minor | |
allowed | |||
|
| ||
Gap between each key and ME | Can’t stuck up or no click feeling, It couldn’t | Minor | |
parts | allow stuck up at pressing process | ||
| |||
Gap between all generic ME | Gap between all generic ME parts < 0.3 mm | Minor | |
parts | |||
|
| ||
Gap between Touch Window and | Gap between Touch Window and A parts | Minor | |
A parts | < 0.35 mm | ||
| |||
Stylus | Stylus assembly protruding, loose, missing, falling | Minor | |
and deformed are not allowed | |||
|
| ||
Step between mating parts | Step between all generic ME parts < 0.2 mm. | Minor | |
Reverse step do not accept | |||
|
|
The inspective point of D area:
1.Any marks generated by scratching, grinding or colliding are acceptable except base material exposed
2.Not allow battery connector deform. The hook of battery cover also can’t allow broken and deform
HTC CONFIDENTIAL
