Default Settings, Technical Specifications, Number | Huawei HG530

7.3 Default Settings

Number	Interface	Description
	or Button
4	Reset	You can press and hold the Reset button for
		over six seconds to restore the default settings
		of the HG530.
		NOTE
		After you restore the default settings, your
		customized data is lost. Therefore, use this
		function with caution.

5 - 8	LAN1 -	It is used to connect to the Ethernet interface on
	LAN4	the computer.
9	ADSL	It is used to connect to the MODEM interface on
		the splitter.

7.3 Default Settings

Parameter	Setting
Subnet mask of the LAN interface	192.168.1.1
IP address of the LAN interface	255.255.255.0
User name used for logging in to the	admin
Web-based configuration utility
Password used for logging in to the	admin
Web-based configuration utility
DHCP server function	Enable
Wireless network function	Enable

7.4 Technical Specifications

Item	Specification
Entire-device power	12 V DC, 0.5 A
supply
	24

Image 26

Huawei HG530 manual Default Settings, Technical Specifications, Number, Interface, Description, or Button, Parameter

Contents

User Guide HUAWEI HG530 Home Gateway 3 Setting the Network-Access Parameters Contents2 Connecting the Cables and Getting Started 4 Configuring the Wireless Network Connection Basic Requirements 1 Warnings and PrecautionsEnvironmental Requirements for Using the Device Areas with Inflammables and Explosives Precautions for Using Wireless DevicesAccessory Requirements Environmental Protection Safety of ChildrenMaintenance 2.2 Getting Started 2 Connecting the Cables and Getting Started2.1 Connecting The Cables Page 3 Setting the Network-Access Parameters 2 Select a PVC number, such as 1, from the PVC drop-down combo box 3 Select Connect to the Internet, and then click Next 4 Configuring the Wireless Network Connection 4. Configure the wireless network connection on your computer 5 Configuring the Device 5.2 Enabling or Disabling the Wireless Network Function 5.3 Changing the Wireless Network Name and the Access Password 5.5 Restoring Default Settings 3. Select Factory Default SettingsPage How can I configure a computer to use a static IP address? 6 FAQsHow can I quickly restore the default settings of the terminal? Can I use the terminal as a DHCP server? What can I do if I cannot visit Web sites through the terminal? 2 In Subnet mask, enter 3 In Default gateway, enter 3 Replace telephone lines 2 Choose Tools Internet Options If the driver is improperly installed, install it properly What can I do if I cannot access the terminal configuration page? What can I do if noises exist during telephone calls? 7.1 Indicators 7 Appendix z No data is being transmitted through the WLAN 7.2 Interfaces and ButtonsIt is the power switch and is used to power on or Setting 7.3 Default Settings7.4 Technical Specifications Specification Specification Trademarks and Permissions NO WARRANTY Import and Export Regulations