Huawei HG556a 4.1.2 Configuring the PPPoE Mode

4 Configuring the WAN Interface

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

4-5

Table 4-3 Parameters for the PPP Username and Password page

Parameter Description

PPP Username The user name of the PPP, which is provided by the

Internet Service Provider.

PPP Password The user name of the PPP, which is provided by the

Internet Service Provider.

PPP's MTU:[296-1492] The maximum length of the transported IP package

with the selected PPPoA protocol.

PPP's LCP Echo-req

Interval:[10-60]

It specifies the time interval of the two echo-requests.

Authentication Method The authentication method of the PPP protocol.

Step 10 Click Next to show the Enable WAN Service page, just keep the default settings. Make

sure choose Data in the Service Name drop-down list box.

Step 11 Click Next to show the WAN Setup-Summary page, click Save to save the settings.

Click Back to make any modifications. Reboot the terminal so that the settings take effect.

----End

4.1.2 Configuring the PPPoE Mode

To configure the PPPoE mode for the WAN interface, do as follows:

Step 1 Repeat from the step1 to the step 7 of 4.1.1 "Configuring the PPPoA Mode."

Step 2 On the Connection Type page, select PPP over Ethernet (PPPoE). Keep other settings

by the Internet Service Provider.

Step 3 Click Next to show the PPP Username and Password page for PPPoE, you can keep

the default settings or set the parameters refer to Table 4-4.

Contents

Main Service Manual Copyright Huawei Technologies Co., Ltd. 20. All rights reserved. Trademarks and Permissions , Notice NO WARRANTY Contents Page Figures Tables About This Document Purpose Related Versions Intended Audience Organization Conventions Symbol Conventions General Conventions Command Conventions GUI Conventions Keyboard Operations Mouse Operations 1 i Bas c Requirements Environmental Requirements for Using the Device Precautions for Using Wireless Devices Areas with Inflammables and Explosives Accessory Requirements Safety of Children Maintenance Disposal and Recycling Information Reduction of Hazardous Substances EU Regulatory Conformance Page Page 2 2.1 Pr 2.2 Hardware 2.2.1 In oduct Features 2.2.2 Interfaces and Buttons Page 3 3.1 Co nnecting Cables 3.2 Inse rting the USB Stick 3.3 Lo gging In to the Web-Based Configuration Utility 4 4.1 Se lecting ADSL uplink mode Page 4.1.1 Configuring the PPPoA Mode Page 4.1.2 Configuring the PPPoE Mode Page 4.1.3 Configuring the MER Mode 4.1.4 Configuring the IPoA Mode 4.1.5 Configuring the Bridge Mode 4.2 Selecting HSPA uplink mode 5 5.1 Setting Up a Wireless Connection by the Wi-Fi Butto n 5.2 Se tting Up a Wireless Connection Manually Page 6 6.1 Configuring Multiple PCs to Access the Internet 6.2 Enabling or Disabling the WLAN Function 6.3 Using the Home Storage Function 6.3.1 6.3.2 Accessing the Storage Device by the FTP Client Accessing the Storage Device by the Samba Function 6.3.3 Accessing the Storage Device by Mapping Network Drive 6.4 Using the USB Printer Function Page Page 6.5 Improving the Security of a WLAN 6.5.1 Hiding the Name of a WLAN 6.5.2 6.5.3 Changing the Name of a WLAN Using Secure Encryption Page 6.5.4 Allowing Only Specified PCs to Be Connected to a WLAN Page 6.6 Controlling the Internet Access Rights of PCs Page 7 7.1 Changing the Administrator Password 7.2 Configuring the LAN Interface 7.3 Ba 7.4 Re cking Up or Updating a Configuration File storing Default Settings 7.5 Re starting the Terminal 7.6 Updating Software Function Overview Confi uration Examg ple 8 How can I Web page browsing and can be displayed after the terminal is restarted? a wireless network adapter? Internet through a wireless network adapter or if the WLAN connection is unsteady? the computer cannot access the WLAN?