Huawei HG556a 4.1.3, Configuring the MER Mode

4 Configuring the WAN Interface

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

4-7

4.1.3

Table 4-5

Configuring the MER Mode

To configure the MER mode for the WAN interface, do as follows:

Step 1 Repeat from the step1 to the step 7 of 4.1.1 "Configuring the PPPoA Mode."

Step 2 On the Connection Type page, select MAC Encapsulation Routing (MER). Keep

other settings by the Internet Service Provider.

Step 3 Click Next to show the WAN IP Settings page, you can keep the default settings or set

the parameters refer to Table 4-5.

Parameters for the WAN IP Settings page

Parameter Description

DHCP Class Identifier It specifies the client.

WAN IP Address It specifies the WAN IP address of the PVC.

When the method for obtaining an IP address is set to

using a static IP address, the terminal provides this

parameter.

WAN Subnet Mask It specifies the WAN subnet mask of the PVC.

When the method for obtaining an IP address is set to

using a static IP address, the terminal provides this

parameter.

Primary DNS server It specifies the IP address of the primary DNS server used

by the PVC.

When the method for obtaining an IP address is set to

using a static IP address, the terminal provides this

parameter.

Secondary DNS server It specifies the IP address of the secondary DNS server

used by the PVC.

When the method for obtaining an IP address is set to

using a static IP address, the terminal provides this

parameter.

IpoE's

MTU:[296-1500]

The maximum length of the transported IP package with

the selected IPoE protocol.

Step 4 Click Next to show the Network Address Translation Settings page, just keep the

default settings. Make sure choose Data in the Service Name drop-down list box.

Step 5 Click Next to show the WAN Setup-Summary page, click Save to save the settings.

Click Back to make any modifications. Reboot the terminal so that the settings take effect.

----End

Contents

Main Service Manual Copyright Huawei Technologies Co., Ltd. 20. All rights reserved. Trademarks and Permissions , Notice NO WARRANTY Contents Page Figures Tables About This Document Purpose Related Versions Intended Audience Organization Conventions Symbol Conventions General Conventions Command Conventions GUI Conventions Keyboard Operations Mouse Operations 1 i Bas c Requirements Environmental Requirements for Using the Device Precautions for Using Wireless Devices Areas with Inflammables and Explosives Accessory Requirements Safety of Children Maintenance Disposal and Recycling Information Reduction of Hazardous Substances EU Regulatory Conformance Page Page 2 2.1 Pr 2.2 Hardware 2.2.1 In oduct Features 2.2.2 Interfaces and Buttons Page 3 3.1 Co nnecting Cables 3.2 Inse rting the USB Stick 3.3 Lo gging In to the Web-Based Configuration Utility 4 4.1 Se lecting ADSL uplink mode Page 4.1.1 Configuring the PPPoA Mode Page 4.1.2 Configuring the PPPoE Mode Page 4.1.3 Configuring the MER Mode 4.1.4 Configuring the IPoA Mode 4.1.5 Configuring the Bridge Mode 4.2 Selecting HSPA uplink mode 5 5.1 Setting Up a Wireless Connection by the Wi-Fi Butto n 5.2 Se tting Up a Wireless Connection Manually Page 6 6.1 Configuring Multiple PCs to Access the Internet 6.2 Enabling or Disabling the WLAN Function 6.3 Using the Home Storage Function 6.3.1 6.3.2 Accessing the Storage Device by the FTP Client Accessing the Storage Device by the Samba Function 6.3.3 Accessing the Storage Device by Mapping Network Drive 6.4 Using the USB Printer Function Page Page 6.5 Improving the Security of a WLAN 6.5.1 Hiding the Name of a WLAN 6.5.2 6.5.3 Changing the Name of a WLAN Using Secure Encryption Page 6.5.4 Allowing Only Specified PCs to Be Connected to a WLAN Page 6.6 Controlling the Internet Access Rights of PCs Page 7 7.1 Changing the Administrator Password 7.2 Configuring the LAN Interface 7.3 Ba 7.4 Re cking Up or Updating a Configuration File storing Default Settings 7.5 Re starting the Terminal 7.6 Updating Software Function Overview Confi uration Examg ple 8 How can I Web page browsing and can be displayed after the terminal is restarted? a wireless network adapter? Internet through a wireless network adapter or if the WLAN connection is unsteady? the computer cannot access the WLAN?