Huawei ME909 manual Power Consumption, Description Bands Test Value Units

HUAWEI ME909 Series Mini PCIe Module
Hardware Guide	Electrical and Reliability Features

5.6.2Power Consumption

The power consumptions of ME909 module in different scenarios are respectively listed in ‎Table 5-7 , ‎Table 5-8 , ‎Table 5-9and ‎Table 5-10 .

The power consumption listed in this section is tested when the power supply of the ME909 module is 3.3 V. Typical values are measured at room temperature, and minimum and maximum values are measured over the entire operating temperature range.

Table 5-7Averaged standby DC power consumption

Description	Bands	Test Value	Units	Notes/Configuration
LTE	LTE	TBD	mA	DRX cycle=8 (2.56 s)
(Standby)	bands			Module is registered on
				and not connected to the
				4G network.
				USB is in suspend mode.
HSPA+/WCDMA	UMTS	TBD	mA	DRX cycle=8 (2.56 s)
(Standby)	bands			Module is registered on
				and not connected to the
				3G network.
				USB is in suspend mode.
GSM/	GSM	TBD	mA	MFRMS=5 (1.175 s)
GPRS/EDGE	bands			Module is registered on
(Standby)				and not connected to the
				2G network.
				USB is in suspend mode.
LTE	LTE	TBD	mA	Module is powered up and
(Idle)	bands			idle
				DRX cycle=8 (2.56 s)
				Module is registered on
				the 4G network, and PDP
				is activated,
				No data transmission.
				USB is not in suspend
				mode.

	Huawei Proprietary and Confidential	37
Issue 0.1 (2013-06-09)	Copyright © Huawei Technologies Co., Ltd.