Setting Up a Wireless Connection Through the Web-Based Configuration Utility
If your wireless router does not support the WPS function, you can manually connect the WS320 to the wireless router by using the Web-based configuration utility.
You need to access the Web-based configuration utility through the wireless network of the WS320. By default, an unencrypted wireless network has been configured on the WS320. The service set identifier (SSID) of the wireless network is Repeater. When you use the WS320 for the first time, you can connect to the default wireless network to access the Web-based configuration utility of the WS320.
Suppose that the wireless SSID of the wireless router is AP. To set up a wireless connection, do as follows:
