9.Secure strut tubes (11) to bottom pole section (6) as shown.
WARNING! | 11 |
TIGHTEN BOLT (14) IN |
| |
1 | ||
LOCK NUT (12) UNTIL | ||
| ||
| ||
FLUSH (EVEN) WITH LOCK |
| |
NUT’S OUTER EDGE. |
|
13
12
11
6
13
14
10.
Carefully place unit in the side position and secure strut (11) to tank (1) as shown. Completely tighten. Repeat for opposite side. Upright unit.
NOTE:
Keep unnecessary pressure off of the pole assembly when in this position. Two people recommended for this procedure.
11. Install pole mount bracket (17) and reinforcement bracket (37) with carriage bolts (18) as shown. Tighten flange nuts (16) completely.
15
1
13
37
4
18
13
11
16
16
18
1
16
17
P/N 211954E 01/04 | 12 |
