25. Insert handle assembly through pole mount assembly as shown. Lock pole assembly in place at the 10’ (3.05m) mark with pin (55).
55
26. | Attach adjustment rod (47) to lower |
| elevator tubes (27) using bolt (27) spacer |
(59) and nut (42) as shown.
42
47 59
29
59
27
29
HEIGHT ADJUSTMENT
27. To Set Backboard Height:
A.While holding handle, remove pin (55).
B.Move elevator up or down to desired height.
C.Replace pin full length to lock system at desired height.
A
55
C
B
13 | 06/03 P/N 211543B |
