2.Identify pole sections.
5
Identification Sticker
4
6
While maintaining alignment, bounce middle pole section (5) into top section (4)
3.using a wood scrap as shown until the top pole no longer moves toward the pole
identification sticker on the middle pole.
IMPORTANT!: | CAUTION! | ||
THE IDENTIFICATION STICKER IS | |||
|
| ||
Align dimple of top pole section (4) | LOCATED 5" FROM THE END OF | ||
THE POLE. WHEN PROPERLY | |||
POUNDED TOGETHER, THE POLE | |||
into trough of middle pole section (5) | MINIMUM OVERLAP, LEAVING 1- | ||
as shown. |
| SECTIONS SHOULD HAVE A | |
| POLE AND THE IDENTIFICATION | ||
|
| 1/2" BETWEEN THE OVERLAPPING | |
|
| STICKER. | |
pole em | ID |
| |
| STICKER |
| |
TROUGH |
| 5 | |
5" |
|
| |
| pole middle |
| |
|
| ||
| DIMPLE | 4 | |
|
| ||
| HOLE | WOOD SCRAP | |
| (NOT SUPPLIED) | ||
|
| ||
13 | 07/05 | ID# M671111 |
