9.Insert bolt (29) through left side upper elevator tube (35), then stretch spring (33) onto bolt (29). Insert bolt (29) through right side upper elevator tube (35) and secure with nut (31).
WARNING! |
USE EYE PROTECTION |
WHEN INSTALLING |
SPRINGS. |
35
29
33
31
35
10.Roll completed assembly to desired position. Fill tank with water (approx. 34 gallons (129 Liters)) or sand (approx. 280 lbs. (128 kg)) and snap cap
(41)in place. Secure assembly to ground using rope (44) and tie down stake (45).
CAUTION!
ADD TWO GALLONS (7.6 LITERS) OF
WARNING! |
DO NOT LEAVE |
ASSEMBLY UNATTENDED |
WHEN EMPTY; IT MAY TIP |
OVER. |
41
44
45
SAND |
| lb | . | ) |
|
| kg) | ||
(225 |
| |||
|
|
| ||
| (102 |
| ||
NOTE:
IF USING SAND: 2 GALLONS OF ANTI-FREEZE IS NOT REQUIRED
25 | 07/04 | P/N 21463608 |
