Manuals / Huffy / Fitness & Sports / Board Games

Huffy Portable System manual Net Installation, 01/05, Insert net into bottom of clip as shown

Models: Portable System

1 22

Download 22 pages 677 b

Page 21

NET INSTALLATION

NET INSTALLATION

6.	21
	20
	26
	Insert net into bottom of clip as shown.

SIDE VIEW

NETCLIP

NET

Twist net until it snaps into position. Net must be centered through clip.

SIDE VIEW

NETCLIP

NET

21

01/05

P/N 211022

Image 21

Huffy Portable System manual Net Installation, 01/05, Insert net into bottom of clip as shown, Side View Netclip Net

Contents

Portable System Owners Manual Toll-Free Customer Service Number for U.SFor Canada For Europe 00 800 555 85234 Sweden 009 555 For Australia 1-800-333AVANT DE COMMENCER BEFORE YOU START¡ANTES DE COMENZAR VORBEREITENDE MASSNAHMENOwner must ensure that all players know and follow these rules for safe operation of the systemDo not slide, climb, shake or play on base and/or pole NOTICE TO ASSEMBLERS Remove all contents from boxesSAFETY INSTRUCTIONS HEIGHT ADJUSTMENTMOVING SYSTEM POLE SUPPORT STRUT BASE BACKBOARDFRONT Get to know the basic parts of your basketball systemItemQty.Part No. Description PARTS LIST - See Hardware IdentifierItemQty.Part No. Description Not all hardware will be usedHARDWARE IDENTIFIER NUTS & WASHERS HARDWARE IDENTIFIER BOLTSItem #7 1/2” 9/16” 3/4” SECTION A ASSEMBLE THE BASETOOLS REQUIRED FOR THIS SECTION 2 1/2”, 2 9/16 AND 2 3/4 Wrenches AND/OR 2 Socket Wrenches and SocketsMIDDLE POLE 43” TOP POLE 31”BOTTOM POLE 43” 1. Remove contents from tank3. IMPORTANT! Center alignment slot of middle pole section 5 in a lower hole of top pole section 4 as shown. While maintaining alignment, bounce pole top 4 and middle section 5 together as shown until they no longer move toward taped reference mark. Upright assembly TIGHTEN DO NOT OVER01/05 8. Secure base struts 10 to base using bolt 15, washers 12, and nutToward TowardBoard Pole12. Secure pawl 27 in place with clevis pin 30 and washers 18 as shown 1/2” 9/16” 3/4” SECTION B ATTACH THE BACKBOARDTOOLS REQUIRED FOR THIS SECTION 2 1/2”, 2 9/16” AND 2 3/4” Wrenches AND/OR 2 Socket Wrenches and SocketsAttach rim 21 and plastic spacer to board with Attach pole cap 22 as shown 3. Support pole on sawhorsePage 01/05 NET INSTALLATIONInsert net into bottom of clip as shown SIDE VIEW NETCLIP NETADJUST HEIGHT DO NOT ALLOWCHILDREN TO